HP LaserJet P2010 Printer Series

HP LaserJet P2010 Printer Series Driver Download it the solution software includes everything you need to install your HP printer.
HP LaserJet P2010 Printer Series
HP LaserJet P2010 Printer Series
HP Laserjet Full Feature Software and Driver Download Support Windows 10/8/8.1/7/Server/Vista/XP and Mac OS X Operating System.

HP LaserJet Driver and Software Download
Operating Systems HP LaserJet P2014 and P2014n Host Based Plug and Play Package:

Microsoft Windows 10 32-bit
Microsoft Windows 2000
Microsoft Windows 7 32-bit
Microsoft Windows 8 32-bit
Microsoft Windows 98SE
Microsoft Windows ME
Microsoft Windows Server 2003
Microsoft Windows Vista 32-bit
Microsoft Windows XP 32-bit

Type: Drivers
Version: 20130401
Release date: Jun 19, 2013
File name: ljP2010-HB-pnp-win32-en.exe (2.7 MB)

Download

Description

The Host Based Plug and Play Package provides easy installation and offers basic printing functions.

Fixes

Windows 8 Support.

HP LaserJet Driver and Software Download
Operating Systems Mac OS:

Mac OS X 10.5
Mac OS X 10.6
Mac OS X 10.7

Type: Firmware
Version: 20120608
Release date: Aug 17, 2012
File name: P2014_FW_Upgrade_Utiltiy_20120608_v1_11.dmg (4.3 MB)

Download

Description

The following firmware update utility is for the HP LJ P2014 series printers only. This utility is for use on all versions of Mac OS X. The utility can be used with an USB connection or network connection. This update is recommended for HP LJ P2014 printers that have a prior version of firmware. This utility updates the printer firmware to the latest version. The firmware version can be found on the Self Test/Configuration Page.

Fixes

Firmware Version 20120608 Fix:
  • Implement RFU Enable/Disable/Lock setting to prevent unauthorized firmware updates. 
  • Implement button press control as follows: 
  • Pressing the cancel button for 10 seconds causes the printer to enter the RFU enable/disable mode.
  • The printer signals that it is in this mode by flashing the ready, attention, and go LED's. The other 3 LEDs will indicate the current state.  
  • Pressing the cancel button again will save the current state. 
  • While in RFU enable/disable mode, there are 4 possible states the printer can be in. Pressing the go button will cause the printer to move to the next state. LEDs signal the current state. The 4 states in order are:
  1. If the Paper Out LED is lit, RFU is enabled. 
  2. If the Toner Low LED is lit, RFU is disabled.
  3. If the Paper Jam LED is lit, RFU is locked.
  4. If none of those LEDs are lit, the printer is in cancel mode. Exiting RFU enable/disable will return the printer to it's previously saved configuration.
  • aji Line added to the config page to indicate the current state of the RFU setting (enable/disable/locked). This line will be in English only.


  • How to Download and Instal for Windows
    Download / Installation Procedures
    1. Click the link, select [ Save ], specify “Save As”, then click [ Save ] to download the file. Memo : If you select [ Run ] ( or [ Open ] ) instead of [ Save ], the file will be automatically installed after it is saved.
    2. The downloaded file will be saved in the specified place in the self-extracting form (exe)
    3. Double-click the downloaded EXE file to decompress it, then installation will start automatically.
    How to Download and Install for Mac
    Download / Installation Procedures
    • Download the file. For the location where the file is saved, check the computer settings.
    • Double-click the downloaded file and mount it on the Disk Image.
    • Double-click the mounted Disk Image.
    • Double-click the packaged file in the folder. Installation starts automatically.

    Post a Comment

    0 Comments