HP LaserJet Enterprise M604 Series

HP LaserJet Enterprise M604 Series Driver Download it the solution software includes everything you need to install your HP printer.
HP LaserJet Enterprise M604 Series
HP LaserJet Enterprise M604 Series
HP Laserjet Full Feature Software and Driver Download Support Windows 10/8/8.1/7 Operating System.

HP LaserJet Driver and Software Download
Operating Systems Windows:

Microsoft Windows 10 32-bit
Microsoft Windows 10 64-bit
Microsoft Windows 7 32-bit
Microsoft Windows 7 64-bit
Microsoft Windows 8 32-bit
Microsoft Windows 8 64-bit
Microsoft Windows 8.1 32-bit
Microsoft Windows 8.1 64-bit

Type: Drivers
Version: 14.0.18141.498
Release date: May 21, 2018
File name: HP_LaserJet_Enterprise_M604-full-solution-18141.exe (117.0 MB)

Download

Description

The full solution software includes everything you need to install your HP printer. This collection of software includes the complete set of drivers, installer software, and other administrative tools found on the printer's software CD.

NOTE: Due to the size of this download, HP recommends dial-up customers order this software on CD. Online ordering is not applicable in all countries.

Fixes

Korean fonts batang.ttc, gulim.ttc, H2GTRM.TTF, HMKMM.TTF, malgun.ttf will not print in bold.

HP Laserjet Full Feature Software and Driver Download Support Windows Server/Vista and XP Operating System.

HP LaserJet Driver and Software Download
Operating Systems Windows HP LaserJet Enterprise M604 PCL.6 Print Driver (no installer):

Microsoft Windows Server 2003
Microsoft Windows Server 2008 W32
Microsoft Windows Vista 32-bit
Microsoft Windows XP 32-bit

Type: Drivers
Version: 3.01.02.18292
Release date: Oct 20, 2016
File name: HP_LaserJet_M604_PCL6_Legacy_Print_Driver_no_Installer_15316.exe (14.6 MB)

Download

Description

This solution provides only the PCL.6 driver without an installer.
To install the print driver use the Add Printer Wizard.
Supports 32 bit Operting systems only.

The following are compatible system requirements for Windows:

  • CD-ROM or DVD drive, or Internet connection.
  • Dedicated universal serial bus (USB 1.1 or 2.0) connectivity port, or network connection.
  • 400 MB of available hard-disk space.
Installation Instructions
  1. Close any software programs running on your computer.
  2. Turn on the printer.
  3. Click on the Download button on this page.
  4. Click the downloaded file and extract the file. Make a note of the folder location in the self-extractor screen. This is where the files will be extracted.
  5. Click Start, select Settings, select; Control Panel, and then select Printers.
  6. Click Add (a) printer.
  7. Answer the questions in the Add Printer Wizard until you reach the screen that shows the printer manufacturer list.
  8. Click Have Disk.
  9. Browse to the folder where the files were downloaded and extracted, in step
  10. Select the appropriate INF file.
  11. Click Open, and then click OK
  12. Select the appropriate printer.
  13. Follow the remaining on-screen instructions to complete the printer installation.
Optional Input Accessories
For configuring the software for optional input accessories including the optional envelope feeder – F2G74A, optional 500-sheet paper feeder, included with the x models, – F2G68A, and the optional 1,500 sheet paper feeder – F2G73A see the instructions below:
Windows XP, Windows Vista®:
When attaching the accessory before installing the product software, this procedure is not necessary, unless the product is connected to a computer with a USB cable.
When attaching the accessory after installing the product software or when using a USB connection, perform the following steps:
  • Make sure the product is turned on and connected to the computer or network.
  • Open the Windows Start menu, and then click Devices and Printers, or Printers and Faxes for XP.
  • Right-click the name of this product, and select Printer Properties, or Properties for XP.
  • Click the Device Settings tab.
  • Click the Installable Options section.
  • Update the installed options. The steps vary according to connection type:
For a network connection:
In the drop-down box next to Automatic Configuration, select Update Now.

Windows XP only:
Note: For a USB connection, do not select Update Now since there is no bidirectional communication with the printer for this driver. If Update Now is selected, a delay of several minutes will occur while the driver tries to connect to the printer and eventually times out.

For a USB connection for Windows XP and Windows Vista®:
Manually install the accessory by opening the appropriate category and installing the accessory
Optional Output Accessories

For configuring the software for optional output accessories including the Stapler/Stacker - F2G72A, Stacker - F2G71A, and the Multi Bin Mailbox - F2G81A, see the install instructions that came with the accessory.

LaserJet Enterprise M604n, dn, M605n, dn, M606dn software configuration - Windows XP, and Windows Vista®:

Windows XP only:
Note: For a USB connection, do not select Update Now since there is no bidirectional communication with the printer for this driver.  If Update Now is selected, a delay of several minutes will occur while the driver tries to connect to the printer and eventually times out.

For the product specific HP PCL.6 32 bit driver connecting with a USB cable in Windows XP, and Windows Vista®, perform the following steps:
  1. Make sure the product is turned on and connected to the computer.
  2. Open the Windows Start menu, and then click Devices and Printers, or Printers and Faxes for XP.
  3. Right-click the name of this product, and select Printer Properties (or Properties for XP).
  4. Click the Device Settings tab.
  5. Click the Installable Options section.
  6. For M604n and M605n: In the drop-down box next to Duplex Unit, for 2-Sided Printing, select Not Installed.
    For M605dn and M606dn: In the drop-down box next to Duplex Unit, for 2-Sided Printing, select Installed.
  7. In the drop-down box next to Printer Hard Disk, select Installed.
  8. Note: This setting applies even if an optional hard disk is not installed. The product comes with an embedded multi-media controller instead of a hard disk. An optional hard disk is also available.
  9. In the drop-down box next to Mopier Mode, select Enabled.
  10. n the drop-down box next to Device Type, select Monochrome.
LaserJet Enterprise M605x, M606x software configuration - Windows XP, and Windows Vista®:
Windows XP only:
Note: For a USB connection, do not select Update Now since there is no bidirectional communication with the printer for this driver. If Update Now is selected, a delay of several minutes will occur while the driver tries to connect to the printer and eventually times out.

For the product specific HP PCL.6 32 bit driver connecting with a USB cable in Windows XP, and Windows Vista®, perform the following steps:
  1. Make sure the product is turned on and connected to the computer.
  2. Open the Windows Start menu, and then click Devices and Printers, or Printers and Faxes for XP.
  3. Right-click the name of this product, and select Printer Properties, or Properties for XP.
  4. Click the Device Settings tab.
  5. Click the Installable Options section.
  6. In the drop-down box next to Tray 3, select Installed.
  7. In the drop-down box next to Duplex Unit for 2-Sided Printing, select Installed.
  8. In the drop-down box next to Printer Hard Disk, select Installed.
  9. Note: This setting applies even if an optional hard disk is not installed. The product comes with an embedded multi-media controller instead of a hard disk. An optional hard disk is also available.
  10. In the drop-down box next to Mopier Mode, select Enabled.
  11. In the drop-down box next to Device Type, select Monochrome.

Fixes

Fixed a spooler issue causing slow printing where jobs would be held in the spooler until finished before being sent to the printer.

HP LaserJet Driver and Software Download
Operating Systems Windows HP LaserJet Enterprise M604 Printer series PCL.6:

Microsoft Windows Server 2003
Microsoft Windows Server 2008 W32
Microsoft Windows Vista 32-bit
Microsoft Windows XP 32-bit

Type: Drivers
Version: 14.0.17298.489
Release date: Oct 31, 2017
File name: HP_LaserJet_M604_PCL6_Legacy_Print_Driver_17298.exe (111.4 MB)

Download

Description

The driver installer file automatically installs the HP PCL.6 driver for your printer. This is a driver-only software solution intended for users who want a print driver to use with their HP device. This software installation can be used on PC's which do not meet the minimum system requirements necessary to install the Full Featured software solution. This IS NOT a full software solution.

The following are compatible system requirements for Windows:

  • CD-ROM or DVD drive, or Internet connection.
  • Dedicated universal serial bus ( SB 1.1 or 2.0) connectivity port, or network connection.
  • 400 MB of available hard-disk space.

Fixes

Fixed a spooler issue causing slow printing where jobs would be held in the spooler until finished before being sent to the printer.

HP LaserJet Driver and Software Download
Operating Systems:

Mac OS X 10.10
Mac OS X 10.11
Mac OS X 10.12
Mac OS X 10.9
MacOS 10.13
MacOS 10.14

Type: Drivers
Version: 2.9.0.180
Release date: Jun 13, 2019
File name: HP_Easy_Start.app.zip (9.1 MB)

Download

Description

HP Easy Start is the new way to set up your HP printer and prepare your Mac for printing. HP Easy Start will locate and install the latest software for your printer and then guide you through printer setup.

Fixes

  • By default disable data collection checkbox for Germany as per GDPR(General Data Protection Regulation)
  • Added support of 10.14 OS
  • Fixed installation failure issue on 10.14
  • Optimized the code to fix download failure
How to Download and Instal for Windows
Download / Installation Procedures
  1. Click the link, select [ Save ], specify “Save As”, then click [ Save ] to download the file. Memo : If you select [ Run ] ( or [ Open ] ) instead of [ Save ], the file will be automatically installed after it is saved.
  2. The downloaded file will be saved in the specified place in the self-extracting form (exe)
  3. Double-click the downloaded EXE file to decompress it, then installation will start automatically.
How to Download and Install for Mac
Download / Installation Procedures
  • Download the file. For the location where the file is saved, check the computer settings.
  • Double-click the downloaded file and mount it on the Disk Image.
  • Double-click the mounted Disk Image.
  • Double-click the packaged file in the folder. Installation starts automatically.

Post a Comment

0 Comments